HEATIT Z-Temp2 - White (RAL 9003)

Heatit Z-Temp2

Heatit Z-Temp2 is a battery-operated thermostat designed for use with water based heating systems. Used in combination with the Heatit Z-Water regulator you can control your heating system with a Z-Wave primary controller/gateway with the use of Heatit Z-Water in combination with one or several Heatit Z-Temp2. This is a “wire-free” solution, saving both time and money.

All communication between the Heatit Z-Temp2 and the controlled device is 100% wireless. Heatit Z-Temp2 has SmartStart. This feature allows the user to include all devices with SmartStart by scanning the QR codes on the devices.

On startup all the devices will automatically be included in the gateway (requires SmartStart compability). This saves the installer a lot of work. Heatit Z-Temp could also be used in situations where a traditional electrical thermostat is not suited. The thermostat may be combined with the Heatit Z-Relay as the actuator installed in a remote location. The Heatit Z-Temp2 is an excellent choice when restoring or remodeling existing buildings, as it is easy to install without any need for wiring. We recommend using several 230V units to strengthen the mesh network.

Features

• Z-Wave thermostat for controlling external relay
• Internal room temperature sensor
• Humidity sensor
• Proximity sensor to turn on the display
• Automatic brightness control
• Firmware updates (OTA)
• Lock mode/child lock
• Weekly program/setback via gateway
• 5 associations
• SmartStart
• Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class

This product is a security enabled Z-Wave Plus product with encryption. The product must be used with a security enabled Z-Wave Controller in order to fully utilize the product.

Technical data

• Protocol: Z-Wave
• Chip: Z-Wave 700 chip
• Rated voltage: 3 x AA batteries (1,5V)
• Ambient temperature: 0°C to 60°C
• Humidity: Max. 85% RH
• Range RF: Min. 40 meters
• Hysteresis: 0,3°C to 3,0°C (default 0,5°C)
• IP Code: IP 21
• Approvals: Z-Wave Plus V2, CE, RED 2014/53/EU, ETSI EN 301 489-1 V2.2.3 (2019-11), ETSI EN 301 489-3 V2.1.1 (2019-03), ETSI EN 300 220-1 V3.1.1 (2017-02), ETSI EN 300 220-2 V3.2.1 (2018-06), EN 62479:2010, EN 62368-1:2014+A11:2017, RoHS 2011/65/EU