Z-Wave Switches
Z-Wave Switches allow to control electric loads for attached devices which can be turned On and Off anytime and anywhere just using mobile phone, tablet or laptop. You will be surprised how simple, useful and cheap the home automation can be, ... thanks to wireless Z-Wave technology !
Heatit Z-DIN 616, DIN rail module
230,40 € tax incl.
192,00 € tax excl.in stockHeatit Z-DIN 616 is Z-Wave Plus DIN rail module with 6 relay outputs and 6 digital inputs Mounted on DIN-rail in switch board 6 x 16A potential free relays Works as slave Z-Wave repeater Firmware Update (OTA) Supports encryption mode: S0, S2
Aeotec Heavy Duty Smart Switch Gen5
139,96 € tax incl.
116,63 € tax excl.in stockAeotec Heavy Duty Smart Switch Gen5 is Z-Wave device for remotely control and report energy usage of a heavy duty wired load Handles heavy loads up to 40 Amps Control your heavy duty appliances, turning them on/off remotely or via a schedule Energy use reported in KWh or Watts 2-Pole Switch Z-Wave Plus Certified
MCO Home Touch Panel Switch
Compatible with Homey112,80 € tax incl.
94,00 € tax excl.in stock soonCan be controlled by any Z-Wave controller (e.g. Fibaro, Vera, ...)Control up to 2 Z-Wave groups: allows you to raise and lower lighting levels or recall a favourite lighting sceneStylish touch panel Z-Wave wall switchesCan switch 2 separate loads up to 1100wCan also support motors
wiDom Energy Driven Switch C
93,00 € tax incl.
77,50 € tax excl.in stock soonThe only device specifically intended for use both as a Relay Switch with integrated power meter, and as an Energy Meter either at the point of entry of your electrical system, or on a section of the latter. Ultra low power consumption Active energy-saving management Monitoring power, energy, voltage, current, power factor Smart opening/closing of the...
Qubino Bistable Switch
Compatible with Homey78,00 € tax incl.
65,00 € tax excl.in stockSwitch loads up to 32A in combination with Qubino Smart Meter.
Aeotec LED Bulb
Compatible with Homey69,95 € tax incl.
58,29 € tax excl.in stockSmart and energy-efficient way to light up your home. Intelligent LED Bulb 16 million colours Z-Wave connectivity Longer Life
Qubino Smart Plug 16A (SCHUKO)
Compatible with Homey69,90 € tax incl.
58,25 € tax excl.in stockQubino Smart Plug 16A is ideal for remotely controlling electrical devices and measuring the energy consumption. Qubino Smart Plug 16A can handle even the highest consumption devices like convectional electric oven, tumble dryer, washing machine or even multiple devices at once.
WiDom Universal Double Switch
63,99 € tax incl.
53,33 € tax excl.in stock soonWiDom universal Double Switch is an ON/OFF control device designed to independently control two separate loads Energy Monitoring Timer Management Extremely low energy usage Intelligent Multichannel
wiDom Energy Driven Switch S
61,80 € tax incl.
51,50 € tax excl.in stock soonThe only device specifically intended for use both as a Relay Switch with integrated power meter, and as an Energy Meter either at the point of entry of your electrical system, or on a section of the latter. Ultra low power consumption Active energy-saving management Monitoring power, energy, voltage, current, power factor Smart opening/closing of the...
Fibaro Relay Switch 1x2,5kW (FGS-212)
Compatible with Homey
Compatible with FIBARO59,99 € tax incl.
49,99 € tax excl.in stockThe Fibaro Z-Wave switch is the smallest available relay switch, it can be controlled both remotely over the Z-Wave network and using a conventional wall switch
Fibaro Relay Switch 2x1,5kW (FGS-222)
Compatible with Homey Compatible with FIBARO59,99 € tax incl.
49,99 € tax excl.in stockIn-wall dual wireless relay switch for the remote control of lighting
Fibaro RGBW Controller (FGRGBWM-441)
Compatible with Homey Compatible with FIBARO59,99 € tax incl.
49,99 € tax excl.in stockFibaro universal wireless relay to control low-voltage LED lights. Multifunctional applications in smart home, building and office control solutions
Fibaro Single Switch 2 (FGS-213)
Compatible with Homey Compatible with FIBARO59,99 € tax incl.
49,99 € tax excl.in stockSingle Switch 2 module to control loads up to 2KW (8A) Enable Z-Wave control of lights and appliances Very small size enables modules to fit into standard switch boxes (45mm recommended) DIY installation User-friendly configuration menu Smart notifications Z-Wave Plus Certified 3-wire system (Neutral required)
Fibaro Double Switch 2 (FGS-223)
Compatible with Homey Compatible with FIBARO59,99 € tax incl.
49,99 € tax excl.in stockDouble Switch 2 module to control two loads up to 1.5KW (6.5A) each. Enables Z-Wave control of two independent lights or appliances 6.5A per channel and 10A total load. Very small size enables modules to fit into standard switch boxes (45mm recommended) DIY installation Z-Wave Plus Certified
POPP Smart Outdoor Plug (Schuko)
Compatible with Homey59,99 € tax incl.
49,99 € tax excl.in stockSmart Outdoor Wall Plug with power measurement. Wall Plug adapter Type F Ratings: 230V~; 50Hz; 15,2A Max. power: 3.500 W Energy consumption measurement in W und kWh Suitable for outdoor use (IP44 protection class) S2 Security Standard Dimensions: 59 x 114 x 73 mm Z-Wave Plus
Philio 2x1.5 KW Power Meter Plus
59,94 € tax incl.
49,95 € tax excl.in stockDouble Relay Inserts to control lighting and measure power consumption. Enable Z-Wave control of lights and small appliances Measure power consumption of appliances (PAN04-1B) Control two independent loads Small size enables inserts to fit into standard switch boxes Require a 3-wire system (including neutral) Z-Wave Plus Certified
Qubino Flush 2 Relays Plus
Compatible with Homey58,80 € tax incl.
49,00 € tax excl.in stock soonDual Relay switch module to control two loads up to 4A each. Enables Z-Wave control of lights and appliances Monitors power consumption Optional Temperature Sensor Very small size enables modules to fit into standard switch boxes (45mm recommended) Z-Wave Plus Certified
Qubino Flush 1 Relays Plus [ZMNHAD1]
Compatible with Homey58,80 € tax incl.
49,00 € tax excl.in stockSingle Relay switch module to control load up to 10A. Enables Z-Wave control of lights and appliances Monitors power consumption Optional Temperature Sensor Very small size enables modules to fit into standard switch boxes (45mm recommended) Z-Wave Plus Certified
Qubino Flush 1D Relay Plus [ZMNHND1]
Compatible with Homey58,80 € tax incl.
49,00 € tax excl.in stockSingle Relay switch module to control load up to 10A. Enables Z-Wave control of lights and appliances Volt-Free (dry) contacts Optional Temperature Sensor Very small size enables modules to fit into standard switch boxes (45mm recommended) Repeater functionality Z-Wave Plus Certified
Fibaro Single Switch HomeKit (FGBHS-213)
Works with Apple HomeKit56,99 € tax incl. 59,99 €
47,49 € tax excl.in stockReduced price!Fibaro Single Switch is designed to be installed in standard wall switch boxes Control connected devices either via HomeKit technology (using Bluetooth low energy) or via a switch connected directly to it Active power and energy consumption metering functionality Required Neutral Wire (3-wire system) Single Switch is not Z-Wave device
AEOTEC LED Bulb 6 Multi-Color (E27)
Compatible with Homey49,99 € tax incl.
41,66 € tax excl.in stockDimmable RGBW LED Bulb offers 16 million colors Light Appearance: 2700K to 6500K CRI: 80 Brightness: 806 lumens Lamp for E27 socket Input: 220-240V, 50Hz Power Consumption: max. 9.5 W Z-Wave Plus
TKB Z-Wave Single Paddle Wall Switch - Gen5 (TZ56S)
Compatible with Homey48,00 € tax incl.
40,00 € tax excl.in stockIntegrated wall switch to control appliances locally or through Z-Wave controller. Sleek design to fit in with the contemporary home design Controls a local (wired) load and three additional Z-Wave groups Product requires a neutral blue wire for operation
TKB Z-Wave Dual Paddle Wall Switch - Gen5 (TZ36-D)
Compatible with Homey48,00 € tax incl.
40,00 € tax excl.in stockDual wall switch to control lights and Z-Wave devices. Sleek design to fit in with the contemporary home Controls a local (wired) load and three additional Z-Wave groups Product requires a neutral blue wire for operation Z-Wave Plus (Gen5)
Zipato RGBW Bulb 2
Compatible with Homey46,80 € tax incl.
39,00 € tax excl.in stockMake your home lighting more fun and comfortable and control it wirelessly via your smartphone or PC. Remotely Controlled RGBW LED Bulb Fits a standard E27 connector Thousands of colours available Uses Z-Wave network Adjustable brightness Replaces a 60W incandescent bulb Low heat generation Z-Wave Plus Certified
Hank RGBW LED Bulb
Compatible with Homey39,90 € tax incl.
33,25 € tax excl.in stockWith RGBW Bulb from Hank you can paint your rooms in bright warm and colourful lights of the rainbow. 16 Million of Colours, warm white and cold white OTA Firmware upgrade supported Energy efficiency class: A+ Socket type E27 (EU) No cables required, easy to install FCC, ETL, CE and Z-Wave Plus Certified
Secure SIR321 Countdown Timer
39,80 € tax incl. 49,80 €
33,17 € tax excl.in stockReduced price!Z-Wave timer used to control heating appliances and panels Easy installation Associates with existing Z-Wave devices Operates in 30, 60 or 120 minute intervals Operate in Z-Wave mode in 1 minute intervals Flush or surface mounting
TKB On/Off Switch Gen5
Compatible with Homey39,00 € tax incl.
32,50 € tax excl.in stockTKB Home Z-Wave Plus wall plug module with On/Off functionality type Schuko
AEOTEC LED Bulb 6 Multi-White (E27)
Compatible with Homey34,99 € tax incl.
29,16 € tax excl.in stockDimmable LED bulb offers warm and cool shades of white Light Appearance: 2700K to 6500K CRI: 80 Brightness: 806 lumens Lamp for E27 socket Input: 220-240V, 50Hz Power Consumption: max. 9.5 W Z-Wave Plus
Qubino Contactor
30,60 € tax incl.
25,50 € tax excl.in stockQubino Contactor 2-poles installation contactor Thermal Current: 32A Rated current AC-1: 32A
DIN Rail mounting for 3x Fibaro Modules
13,99 € tax incl.
11,66 € tax excl.in stockHolder suitable for mounting up to 3 selected Fibaro modules on DIN rail.
DIN Rail mounting for 2x Fibaro Modules
9,98 € tax incl.
8,32 € tax excl.in stockHolder suitable for mounting up to 2 selected Fibaro modules on DIN rail.
DIN Rail mounting for 1x Fibaro Modul
6,99 € tax incl.
5,83 € tax excl.in stockHolder suitable for mounting 1 selected Fibaro module on DIN rail.
![Qubino Flush 1 Relays Plus [ZMNHAD1]](https://smarterhome.sk/1026-home_default/qubino-flush-1-relays-plus-zmnhad1.jpg "Qubino Flush 1 Relays Plus [ZMNHAD1]")
![Qubino Flush 1D Relay Plus [ZMNHND1]](https://smarterhome.sk/1028-home_default/qubino-flush-1d-relay-plus-zmnhnd1.jpg "Qubino Flush 1D Relay Plus [ZMNHND1]")
- 1
- 2
- SMART SOLUTIONS
- About Z-Wave
- Information
- Blog
- Forum
- Brands
- Write us
- B2b
- Z-Wave Controllers
- Sensors and detectors
- Electrical meters
- Heating and Climate
- Switches and Dimmers
- IP Cameras
- Door Locks
- Wall Plugs
- Window and Blinds Control
- Z-Wave Starter Kits
- Multimedia Control
- APPLE HOMEKIT
- Danfoss Link
- !!! DEALS AND DISCOUNTS !!!
English 
Slovenčina 
Čeština