A Z-Wave PC adapter enables home automation software running on a PC to interact with a Z-Wave network. PC-adapters either use the Universal System Bus (USB) or the RS 232 serial port. Depending on the software used the PC adapters usually act as static controller however there are USB adapter with built-in battery. They act as portable inclusion controller then. Via the PC-adapter PC software for home automation can control Z-Wave devices such as switches, dimmers or sensors and they can perform a broad range of functions such as time triggered events, scene selection and switching and much more.
Aeotec
Z-Wave Plus v2 AEOTEC Z-Pi 7 plug-in module to add Z-Wave connectivity to the Raspberry Pi board. Plugs into the Raspberry Pi GPIO interface Includes all firmware drivers and Z-Wave stack Optimized antenna - the module can now achieve a range of up to 100 meters (indoor) Raspberry Pi board is not included Z-Wave Plus v2 (Z-Wave 700)
Aeotec
AEOTEC Z-Stick 7 is a USB Z-Wave adapter used to create a Z-Wave gateway using e.g. open-source software. USB-Stick converts computer, laptop, RPi, etc. to the Z-Wave gate Manages up to 232 Z-Wave devices Usable with various Z-Wave software solutions such as OpenHab, HomeAssistant Z-Wave 700
Aeotec
AEOTEC Z-Stick Gen5+ is USB based Z-Wave antenna used to build a gateway with open-source software. USB-Stick turns PC, laptop, RPi, etc. into a Z-Wave gateway Manages up to 232 Z-Wave devices Useable with different Z-Wave software solutions like OpenHab, HomeAssistant upgraded model - works with Raspberry Pi 4 or earlier Z-Wave Plus (Z-Wave 500)
Aeotec
Aeotec Zi-Stick (Zigbee) lets you build your own Smart Home automation gateway using Zigbee 3.0 technology. Zigbee 3.0 USB stick 2.4GHz globally recognised frequency Zigbee compatible microcontroller EFR32MG21 inside Multiple plugins for openHAB, Home Assistant, Node-RED and other DIY platforms
Home Assistant
Home Assistant SkyConnect is a universal Zigbee, Thread and Matter compatible USB adapter. A future firmware update will bring Thread support, this allows SkyConnect to power your Matter and Zigbee networks at the same time Easy way to add Zigbee support Perfect match for Home Assistant users Updates delivered via Home Assistant Plug and Play
Orange Pi
Orange Pi Zero LTS 512MB Development Board offering amazing possibilities of not only the home automation. CPU H2+ Quad-core 4x1,20Ghz (ARM Cortex-A7) 512MB DDR3 SDRAM 10/100M Ethernet 2.4GHz Wi-Fi Requires adapter Micro USB 5V 2A
Phoscon by dresden elektronik
The universal Zigbee USB gateway. Enables you to control and monitor any ZigBee device from microcomputer like Raspberry Pi 4 with open-source automation software like HomeAssistant, OpenHab or else. Unites Zigbee devices of many vendors Strong signal range via power-amplifier A cloud free solution Works with popular Home Automation Systems
POPP
Enables you to control and monitor any ZigBee device from microcomputer like Raspberry Pi 4 with open-source automation software like HomeAssistant, OpenHab or else. Zigbee compatible microcontroller EFR32MG1 UART interface with standard NCP commands from Silicon Labs Plugins for openHAB, Home Assistant, Node-RED and other DYI platforms C, Node.js and...
POPP
Allows you to control and monitor ZigBee devices from microPC, such as the Raspberry Pi, with software such as HomeAssistant, OpenHab, or other. Includes Zigbee compatible microcontroller EFR32MG1 SART interface with standard NCP commands from Silicon Labs Plugins for openHAB, Home Assistant, Node-RED Node.js support and Python to create...
Raspberry Pi
The new model of a PC Raspberry Pi 4 Model B 4GB offering amazing possibilities of not only the home automation. Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz 4GB LPDDR4 SDRAM True Gigabit Ethernet 2.4GHz and 5.0GHz Wi-Fi, Bluetooth 5.0, BLE Requires 5.1V, 3A power via USB-C or GPIO
Raspberry Pi
Raspberry Pi 4 model B with 4GB RAM with basic accessories: USB-C power supply microHDMI cable memory card box cooler
Raspberry Pi
Raspberry Pi 4 model B with 4GB RAM with basic accessories: Raspberry Pi 4 Model B - 4GB RAM x 1 Zonepi box for Raspberry Pi 4B, galaxy x 1 Raspberry Pi 32GB microSDHC Class 10 UHS-I U1 A1 with NOOBS & Raspberry Pi OS x 1 Raspberry Pi SD adapter x 1 Aluminum heatsink 27.8 x 27.8 x 11.2mm x 1 HDMI - microHDMI cable 2m x 1 Argon USB-C 5,25V⎓3,5A power...
Raspberry Pi
Raspberry Pi 4 model B with 8GB RAM with basic accessories: Raspberry Pi 4 Model B - 8GB RAM x 1 Zonepi box for Raspberry Pi 4B, galaxy x 1 Raspberry Pi 32GB microSDHC Class 10 UHS-I U1 A1 with NOOBS & Raspberry Pi OS x 1 Raspberry Pi SD adapter x 1 Aluminum heatsink 27.8 x 27.8 x 11.2mm x 1 HDMI - microHDMI cable 2m x 1 Argon USB-C 5,25V⎓3,5A power...
Raspberry Pi
Raspberry Pi 4 model B with 2GB RAM with basic accessories: USB-C power supply microHDMI cable memory card box cooler
Raspberry Pi
Raspberry Pi 4 model B with 1GB RAM with basic accessories: USB-C power supply microHDMI cable memory card 32GB box
Z-Wave.Me
Z-Wave.me Z-Uno 2 is developer board that allows you to create your own Z-Wave device Control any Arduino compatible peripherals Z-Wave 700 series For developers only
Z-Wave.Me
Plug-in module to add Z-Wave connectivity to the Raspberry PI board Plugs into the Raspberry PI GPIO interface Includes all firmware drivers and Z-Wave stack Includes Z-Way AJAX-based demo user interface for easy access to Z-Wave functions Optimized antenna - the module can now achieve a range of up to 200 meters Raspberry PI board is not included Z-Wave 700
Z-Wave.Me
Plug-in module to add Z-Wave connectivity to the Raspberry PI board Plugs into the Raspberry PI GPIO interface Includes all firmware drivers and Z-Wave stack Includes Z-Way AJAX-based demo user interface for easy access to Z-Wave functions Optimized antenna - the module can now achieve a range of up to 200 meters Raspberry PI board is not included Z-Wave...