Aeotec
Aeotec Heavy Duty Smart Switch Gen5 is Z-Wave device for remotely control and report energy usage of a heavy duty wired load Handles heavy loads up to 40 Amps Control your heavy duty appliances, turning them on/off remotely or via a schedule Energy use reported in KWh or Watts 2-Pole Switch Z-Wave Plus Certified
Aeotec
Make your lights smart with AEOTEC Nano Dimmer Works with almost any type of lights - incandescent, dimmable LED bulbs, dimmable CFL lights, fluorescent bulbs, halogen (with and without transformer), Works with or without neutral Measure energy consumption Surge and Overload protection Works as Repeater Z-Wave Plus
Aeotec
Nano Switch with Energy-Use Metering (ZW116) from Aeotec Convert any switch or outlet into a Z-Wave connected switch or outlet Control load wirelessly - Maximum load 2,300 W Power metering Super small Z-Wave Plus (Z-Wave 500)
Aeotec
Nano Switch (ZW139) from Aeotec Convert any switch or outlet into a Z-Wave connected switch or outlet Control load wirelessly - Maximum load 2,300 W Without power metering Super small Z-Wave Plus (Z-Wave 500)
Aeotec
Dual Nano Switch with Energy-Use Metering (ZW132-C) from Aeotec Convert any switch or outlet into a Z-Wave connected switch or outlet Control 2 loads wirelessly - Maximum load 2x1150W Power metering Super small Z-Wave Plus (Z-Wave 500)
Aeotec
Dual Nano Switch (ZW140) from Aeotec Convert any switch or outlet into a Z-Wave connected switch or outlet Control 2 loads wirelessly - Maximum load 2x 1150W Without power metering Super small Z-Wave Plus (Z-Wave 500)
Aqara
Aqara Single Switch Module T1 (With Neutral) is a relay control module based on Zigbee 3.0 wireless communication protocol. This product is mainly used to control the power on/off of lights or fans. Remote control of load to 2300W (10A) External control switch connection Overheat & Overload Protection Energy metering Zigbee 3.0
Aqara
Aqara Single Switch Module T1 (No Neutral) is a relay control module based on Zigbee 3.0 wireless communication protocol. This product is mainly used to control the power on/off of lights or fans. Remote control of load to 5A External control switch connection Energy metering Zigbee 3.0 No need for a Neutral cable
FIBARO
Single Switch 2 module to control loads up to 2KW (8A) Enable Z-Wave control of lights and appliances Very small size enables modules to fit into standard switch boxes (45mm recommended) DIY installation User-friendly configuration menu Smart notifications Z-Wave Plus Certified 3-wire system (Neutral required)
FIBARO
Double Switch 2 module to control two loads up to 1.5KW (6.5A) each. Enables Z-Wave control of two independent lights or appliances 6.5A per channel and 10A total load. Very small size enables modules to fit into standard switch boxes (45mm recommended) DIY installation Z-Wave Plus Certified
FIBARO
Fibaro Single Switch is designed to be installed in standard wall switch boxes Control connected devices either via HomeKit technology (using Bluetooth low energy) or via a switch connected directly to it Active power and energy consumption metering functionality Required Neutral Wire (3-wire system) Single Switch is not Z-Wave device
FIBARO
The ultimate Z-Wave Plus wall switch - control and monitor lightning. Wireless Z-Wave On/Off control lightning Control one or two light sources via Z-Wave network Monitor and analyse energy usage Beautiful colour LED Z-Wave Plus Certified
FIBARO
10 piece package of the ultimate Z-Wave Plus wall switch - control and monitor lightning. 10 piece package Wireless Z-Wave On/Off control lightning Control one or two light sources via Z-Wave network Monitor and analyse energy usage Beautiful colour LED Z-Wave Plus Certified
FIBARO
FIBARO Smart Module (FGS-214) is the smallest available relay switch, it can be controlled both remotely over the Z-Wave network and using a conventional wall switch. Control 1 electrical circuit Dry (potential free) output contacts Max. output 6.5A Works as Z-Wave repeater Neutral line wire needed Security Modes S0 and S2 Z-Wave Plus
FIBARO
FIBARO Double Smart Module (FGS-224) is the smallest available relay switch, it can be controlled both remotely over the Z-Wave and using a conventional wall switch. Control 2 electrical circuits Dry (potential free) output contacts Max. output 6A per one channel, 9.5A total Works as Z-Wave repeater Neutral line wire needed Security Modes S0 and S2 Z-Wave...
FIBARO
The ultimate Z-Wave Plus wall switch - control and monitor lightning. Wireless Z-Wave On/Off control lightning Control one or two light sources via Z-Wave network Monitor and analyse energy usage Beautiful colour LED Z-Wave Plus Certified Without plastic Cover Plate and Button and Mounting Frame
FIBARO
The ultimate Z-Wave Plus wall switch - control and monitor lightning. Wireless Z-Wave On/Off control lightning Control one or two light sources via Z-Wave network Monitor and analyse energy usage Beautiful colour LED Z-Wave Plus Certified Without plastic Cover Plate and Button and Mounting Frame 10 pieces pack
FIBARO
Mounting frame for Walli Switches (FG-Wx-AS-4002) Non-Smart without intelligence features to change the design of the wall switch. It does not contain Z-Wave technology and does not support any communication protocol
FIBARO
Mounting frame for Walli Switches (FG-Wx-AS-4002) Non-Smart without intelligence features to change the design of the wall switch. It does not contain Z-Wave technology and does not support any communication protocol Pack of 10 pieces
FIBARO
Mounting frame for Walli Switches (FG-Wx-AS-4003) Non-Smart without intelligence features to change the design of the wall switch. It does not contain Z-Wave technology and does not support any communication protocol
FIBARO
Mounting frame for Walli Switches (FG-Wx-AS-4003) Non-Smart without intelligence features to change the design of the wall switch. It does not contain Z-Wave technology and does not support any communication protocol Pack of 10 pieces
FIBARO
Mounting frame for Walli Switches (FG-Wx-AS-4001) Non-Smart without intelligence features to change the design of the wall switch. It does not contain Z-Wave technology and does not support any communication protocol
FIBARO
Mounting frame for Walli Switches (FG-Wx-AS-4001) Non-Smart without intelligence features to change the design of the wall switch. It does not contain Z-Wave technology and does not support any communication protocol Pack of 10 pieces
FIBARO
The ultimate Z-Wave Plus wall switch - control and monitor lightning. Wireless Z-Wave On/Off control lightning Control one or two light sources via Z-Wave network Monitor and analyse energy usage Beautiful colour LED Z-Wave Plus Certified Color - Anthracite
HELTUN
HELTUN Touch Panel Switch Solo is a Z-Wave Plus v2 enabled wallswitch with 1 button and 1 relay output mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 1 potential-free (dry) relay output up to 5A 1 touch button Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Solo is a Z-Wave Plus v2 enabled wallswitch with 1 button and 1 relay output mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 1 potential-free (dry) relay output up to 5A 1 touch button Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Duo is a Z-Wave Plus v2 enabled wallswitch with 2 buttons and 2 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 2 potential-free (dry) relay outputs up to 5A 2 touch buttons Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Duo is a Z-Wave Plus v2 enabled wallswitch with 2 buttons and 2 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 2 potential-free (dry) relay outputs up to 5A 2 touch buttons Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Trio is a Z-Wave Plus v2 enabled wallswitch with 3 buttons and 3 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 3 potential-free (dry) relay outputs up to 5A 3 touch buttons Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Trio is a Z-Wave Plus v2 enabled wallswitch with 3 buttons and 3 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 3 potential-free (dry) relay outputs up to 5A 3 touch buttons Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Quarto is a Z-Wave Plus v2 enabled wallswitch with 4 buttons and 4 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 4 potential-free (dry) relay outputs up to 5A 4 touch buttons Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Quarto is a Z-Wave Plus v2 enabled wallswitch with 4 buttons and 4 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 4 potential-free (dry) relay outputs up to 5A 4 touch buttons Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Quinto is a Z-Wave Plus v2 enabled wallswitch with 5 buttons and 5 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 5 potential-free (dry) relay outputs up to 5A 5 touch buttons Z-Wave Plus v2
HELTUN
HELTUN Touch Panel Switch Quinto is a Z-Wave Plus v2 enabled wallswitch with 5 buttons and 5 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 5 potential-free (dry) relay outputs up to 5A 5 touch buttons Z-Wave Plus v2
HELTUN
HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor (sensor included) Input for External switch control Z-Wave Plus v2
HELTUN
HELTUN Relay Switch Quinto is a Z-Wave Plus v2 enabled relay switch with 5 outputs mainly applied to control lights, wallplugs or electrical floor heating. Relay outputs (potential-free) can handle up to 5A (each) Inputs for External switches control Z-Wave Plus v2
HELTUN
HELTUN Micro Module Adapter allows installers to directly connect the relay switches to the electrical panel. Ideal for new buildings and renovation, this DIN Rail adapter permits to save time before the installation. Compatible with the HE-HLS01 and HE-RS01 switches Compatible DIN Rail: Type Ω EN 50022 Dimensions L x W x H (mm): 87 x 27 x 58...
HELTUN
HELTUN Touch Panel Switch Quinto is a Z-Wave Plus v2 enabled wallswitch with 5 buttons and 5 relay outputs mainly applied to control lights or control other Z-Wave devices trough association. Multiple built-in sensors - temperature, humidity, light intensity 5 potential-free (dry) relay outputs up to 5A 5 touch buttons Z-Wave Plus v2
Philio
Double Relay Inserts to control lighting and measure power consumption. Enable Z-Wave control of lights and small appliances Measure power consumption of appliances (PAN04-1B) Control two independent loads Small size enables inserts to fit into standard switch boxes Require a 3-wire system (including neutral) Z-Wave Plus Certified
Qubino
Dual Relay switch module to control two loads up to 4A each. Enables Z-Wave control of lights and appliances Monitors power consumption Optional Temperature Sensor Very small size enables modules to fit into standard switch boxes (45mm recommended) Z-Wave Plus Certified