Heatit by Thermo-Floor AS is a renowned company focusing on the supply and development of heating and floor systems. They are an innovative leader in underfloor heating and offer a wide range of high quality heating products for residential, commercial and industrial use.
Heatit by Thermo-Floor AS is a renowned company focusing on the supply and development of heating and floor systems. They are an innovative leader in underfloor heating and offer a wide range of high quality heating products for residential, commercial and industrial use.
Heatit by Thermo-Floor AS
Heatit Z-DIN 616 is Z-Wave Plus DIN rail module with 6 relay outputs and 6 digital inputs Mounted on DIN-rail in switch board 6 x 16A potential free relays Works as slave Z-Wave repeater Firmware Update (OTA) Supports encryption mode: S0, S2
Heatit by Thermo-Floor AS
Heatit Z-Water DIN rail module with 10 relay outputs may be used for controlling actuators/valves in a hydronic heating system Control both 24V actuators and 230V actuators Can be used together with a Heatit Z-Temp sensor in each zone DIN rail mounting Works as a Z-Wave repeater 4 Analog inputs to connect 10 kOhm NTC temperature sensors
Heatit by Thermo-Floor AS
Heatit Z-Relay universal relay module can be used for many different applications. IP 55 rated (outdoor usage) Switching loads up to 25A (only 230V AC) Three inputs: analog or digital (or combination) Power metering (just by entering a value parametrically) Z-Wave Plus
Heatit by Thermo-Floor AS
HEATIT Z-Push Button 4 Battery operated wall switch Fits Gira System 55, Elko RS-16 and Schneider Exxact Controls 2 separate group, each group up to 10 devices Controls up to 8 scenarios via your gateway LED-diode Easy to install with screws or double-sided tape Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class
Heatit by Thermo-Floor AS
Z-Wave Wall thermostat to control and monitor electric floor heating Wall thermostat with LCD display Maximum 16A / 3600W load Option to connect floor sensor (3m included in package) Ability to connect an external room air temperature sensor (not included) The thermostat does have a built-in air temperature sensor Available in white Z-Wave Plus Certified
Heatit by Thermo-Floor AS
Heatit Z-Temp2 is a battery-operated thermostat designed for use with water based heating systems. Z-Wave thermostat for controlling external relay Built in temperature and humidity sensor Proximity sensor to turn on the display 5 associations Z-Wave Plus v2 (700 series)
Heatit by Thermo-Floor AS
Heatit Z-Smoke Detector is a multifunctional wireless Z-Wave smoke sensor for smart home systems. Multifunctional smoke detector Smoke and heat Detection Built-in motion and temperature sensor Emergency lighting and back-up battery Z-Wave Plus
Heatit by Thermo-Floor AS
Heatit Z-Temp2 is a battery-operated thermostat designed for use with water based heating systems. Z-Wave thermostat for controlling external relay Built in temperature and humidity sensor Proximity sensor to turn on the display 5 associations Z-Wave Plus v2 (700 series)
Heatit by Thermo-Floor AS
HEATIT ZM Single Relay 16A is universal relay module can be used for many different applications. High power relay for in-wall installations Switching loads up to 16A (only 230V AC) Power metering Z-Wave 700 Indoor usage only
Heatit by Thermo-Floor AS
Z-Wave Wall thermostat to control and monitor electric floor heating Wall thermostat with LCD display Maximum 16A / 3600W load Option to connect floor sensor (3m included in package) Ability to connect an external room air temperature sensor (not included) The thermostat does have a built-in air temperature sensor Z-Wave Plus Certified
Heatit by Thermo-Floor AS
Heatit Z-Push Wall Controller is a Z-Wave switch for wall mounting. It comes with three fronts, so you can choose between 1, 2 or 3 toggle switches. Battery operated wall switch Fits into System-55 frames Controls up to 3 seperate groups and 5 devices per group 10 scene triggers per rocker LED-diode Easy to install with screws or double-sided tape The...
Heatit by Thermo-Floor AS
Heatit Z-Push Wall Controller is a Z-Wave switch for wall mounting. It comes with three fronts, so you can choose between 1, 2 or 3 toggle switches. Battery operated wall switch Fits into System-55 frames Controls up to 3 seperate groups and 5 devices per group 10 scene triggers per rocker LED-diode Easy to install with screws or double-sided tape The...
Heatit by Thermo-Floor AS
Heatit Z-Smoke Detector is a multifunctional wireless Z-Wave smoke sensor for smart home systems. Multifunctional smoke detector Smoke and heat Detection Built-in motion and temperature sensor Emergency lighting and back-up battery Z-Wave Plus Battery powering
Heatit by Thermo-Floor AS
HEATIT Z-Dim2 is a Z-Wave rotary dimmer for many different types of light sources. Trailing edge 2-wire system, neutral wire is not needed Possibility to connect external switch Fits Gira System 55 Easy to install Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class
Heatit by Thermo-Floor AS
Heatit ZM Thermostat 16A is a thermostat for concealed installation in a flush box. Can control maximum 16A / 3600W load Floor sensor (included in package) Power consumption meter Z-Wave 700
Heatit by Thermo-Floor AS
The Heatit Z-Temp2 DC adapter allows you to connect the Heatit Z-Temp2 to the mains so that you are no longer dependent on batteries.
Heatit by Thermo-Floor AS
Heatit Transformer is an in-wall transformer that fits European electrical wall boxes. It enables the user to connect low voltage devices to mains power and change the voltage from 230VAC to either 12VDC, 5VDC or 3.3VDC.Adjust voltage from 230VAC to 12VDC, 5VDC or 3.3VDC Compact size Easy to install
Heatit by Thermo-Floor AS
Heatit ZM Dimmer is an inwall dimmer for installation in European electrical wall boxes. The dimmer enables the user to control light sources from the Z-Wave network and/or an external switch. Works without neutral line Overload and overheat protection Z-Wave 800
Heatit by Thermo-Floor AS
Heatit External Room Sensor is designed for use with Multireg and Heatit thermostats. The sensor can be mounted directly on a wall or on top of a standard European wall box. It can be used with most frames that are adapted to System 55.
Heatit by Thermo-Floor AS
Heatit External Room Sensor is designed for use with Multireg and Heatit thermostats. The sensor can be mounted directly on a wall or on top of a standard European wall box. It can be used with most frames that are adapted to System 55.
Heatit by Thermo-Floor AS
Heatit External Room Sensor is designed for use with Multireg and Heatit thermostats. The sensor can be mounted directly on a wall or on top of a standard European wall box. It can be used with most frames that are adapted to System 55.
Heatit by Thermo-Floor AS
HEATIT Floor sensor ø3mm 3m NTC 10 kΩ is designed for use with Heatit thermostats. For the overheating protection the sensor is located near the floor to overwatch the temperature of the floor.
Heatit by Thermo-Floor AS
HEATIT Floor sensor ø4,5mm 15m NTC 10 kΩ is designed for use with Heatit thermostats. For the overheating protection the sensor is located near the floor to overwatch the temperature of the floor.
Heatit by Thermo-Floor AS
HEATIT Zig Dim is a ZigBee rotary dimmer for many different types of light sources. Trailing edge 2-wire system, neutral wire is not needed Possibility to connect external switch Fits Gira System 55 Easy to install
Heatit by Thermo-Floor AS
Heatit Z-Water2 is a DIN-rail regulator for controlling waterbased heating systems. Can control 230VAC actuators and 24V actuators from an external power supply Equipped with 9 potential free relays for actuators. 2 analog inputs for temperature sensors. Connector for external antenna. DIN-rail installation. Z-Wave 800 chip.
Heatit by Thermo-Floor AS
Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.
Heatit by Thermo-Floor AS
Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.