Heatit Z-DIN 616 is Z-Wave Plus DIN rail module with 6 relay outputs and 6 digital inputs Mounted on DIN-rail in switch board 6 x 16A potential free relays Works as slave Z-Wave repeater Firmware Update (OTA) Supports encryption mode: S0, S2
Aeotec Heavy Duty Smart Switch Gen5 is Z-Wave device for remotely control and report energy usage of a heavy duty wired load Handles heavy loads up to 40 Amps Control your heavy duty appliances, turning them on/off remotely or via a schedule Energy use reported in KWh or Watts 2-Pole Switch Z-Wave Plus Certified
Heatit Z-Relay universal relay module can be used for many different applications. IP 55 rated (outdoor usage) Switching loads up to 25A Three inputs: analog or digital (or combination) Power metering Z-Wave Plus
Can be controlled by any Z-Wave controller (e.g. Fibaro, Vera, ...) Control up to 2 Z-Wave groups: allows you to raise and lower lighting levels or recall a favourite lighting scene Stylish touch panel wall switches Can switch 2 separate loads up to 1100W Can also support motors Z-Wave Plus
The ultimate Z-Wave Plus wall switch - control and monitor lightning. Wireless Z-Wave On/Off control lightning Control one or two light sources via Z-Wave network Monitor and analyse energy usage Beautiful colour LED Z-Wave Plus Certified
The ultimate Z-Wave Plus Wall-Mounted Switch for control and dimming lightning wirelessly. Wireless Z-Wave control and dimming lighting Monitor and analyse energy usage Beautiful colour LED Z-Wave Plus Certified
The only device specifically intended for use both as a Relay Switch with integrated power meter, and as an Energy Meter either at the point of entry of your electrical system, or on a section of the latter. Ultra low power consumption Active energy-saving management Monitoring power, energy, voltage, current, power factor Smart opening/closing of the...
Z-Wave Qubino Din Dimmer Mosfet Switching (Trailing Edge) Perfect for LED and CFL bulbs Controllable either through a Z-Wave network or from the wall switch Dimming loads from 1W to 200W Extremely low energy consumption Integrated power consumption management Supports connection of digital temperature sensor Easy installation (DIN rail mounting) Z-Wave...
Qubino Smart Plug 16A is ideal for remotely controlling electrical devices and measuring the energy consumption. Qubino Smart Plug 16A can handle even the highest consumption devices like convectional electric oven, tumble dryer, washing machine or even multiple devices at once.
Universal dimmer module with a standard 0-10V output and a multi-function input designed for your home Can be used as a push button / switch / potentiometer / 0-10V signal Perfect for dimming lights with balast 0-10V Controlling fan speed (for motors or frequency inverters with 0-10V speed control input) Controlling heating / cooling valves (with 0-10V...
The Fibaro Z-Wave switch is the smallest available relay switch, it can be controlled both remotely over the Z-Wave network and using a conventional wall switch
Smart Outdoor Wall Plug with power measurement. Wall Plug adapter Type F Ratings: 230V~; 50Hz; 15,2A Max. power: 3.500 W Energy consumption measurement in W und kWh Suitable for outdoor use (IP44 protection class) S2 Security Standard Dimensions: 59 x 114 x 73 mm Z-Wave Plus
Fibaro Single Switch is designed to be installed in standard wall switch boxes Control connected devices either via HomeKit technology (using Bluetooth low energy) or via a switch connected directly to it Active power and energy consumption metering functionality Required Neutral Wire (3-wire system) Single Switch is not Z-Wave device
Double Switch 2 module to control two loads up to 1.5KW (6.5A) each. Enables Z-Wave control of two independent lights or appliances 6.5A per channel and 10A total load. Very small size enables modules to fit into standard switch boxes (45mm recommended) DIY installation Z-Wave Plus Certified
Single Switch 2 module to control loads up to 2KW (8A) Enable Z-Wave control of lights and appliances Very small size enables modules to fit into standard switch boxes (45mm recommended) DIY installation User-friendly configuration menu Smart notifications Z-Wave Plus Certified 3-wire system (Neutral required)
WiDom universal Double Switch is an ON/OFF control device designed to independently control two separate loads Energy Monitoring Timer Management Extremely low energy usage Intelligent Multichannel
Universal Z-Wave Dimmer2 insert suitable for all types of light sources. Enable Z-Wave control and dimming of your lights Retrofit into existing light switches Very small size enables modules to fit into standard switch boxes (45mm recommended) Z-Wave Plus Certified
Fibaro universal wireless relay to control low-voltage LED lights. Multifunctional applications in smart home, building and office control solutions
Dual Relay switch module to control two loads up to 4A each. Enables Z-Wave control of lights and appliances Monitors power consumption Optional Temperature Sensor Very small size enables modules to fit into standard switch boxes (45mm recommended) Z-Wave Plus Certified
Universal Z-Wave Flush Dimmer to control all types of light sources. Enables Z-Wave control and dimming of your lights MOSFET technology enables it to work with all bulb types Works with LEDs, Halogens, CFL and Low Voltage bulbs Monitors power consumption Optional Temperature Sensor
Single Relay switch module to control load up to 10A. Enables Z-Wave control of lights and appliances Monitors power consumption Optional Temperature Sensor Very small size enables modules to fit into standard switch boxes (45mm recommended) Z-Wave Plus Certified
Single Relay switch module to control load up to 10A. Enables Z-Wave control of lights and appliances Volt-Free (dry) contacts Optional Temperature Sensor Very small size enables modules to fit into standard switch boxes (45mm recommended) Repeater functionality Z-Wave Plus Certified
Small size Control of RGB, RGBW strips and LED strips or bulbs, halogen lights and fans High output power 5 special scenes effects Z-Wave Plus
Double Relay Inserts to control lighting and measure power consumption. Enable Z-Wave control of lights and small appliances Measure power consumption of appliances (PAN04-1B) Control two independent loads Small size enables inserts to fit into standard switch boxes Require a 3-wire system (including neutral) Z-Wave Plus Certified
Dimmable RGBW LED Bulb offers 16 million colors Light Appearance: 2700K to 6500K CRI: 80 Brightness: 806 lumens Lamp for E27 socket Input: 220-240V, 50Hz Power Consumption: max. 9.5 W Z-Wave Plus
Z-Wave timer used to control heating appliances and panels Easy installation Associates with existing Z-Wave devices Operates in 30, 60 or 120 minute intervals Operate in Z-Wave mode in 1 minute intervals Flush or surface mounting
Transform any home into a smart home with the Philio Dimmer Socket - Gen5 (PHIEPAD02) On/Off physical button and remote control Needed Z-Wave controller for remote control Adjustable light intensity Use in a standard E27 socket E14/E27 adapter Max. Load 200W Incandescent bulb; 20W LED bulbs Automatic repeater to other Z-Wave devices for full house...
Wireless dimmer allows remote control and dimming of most types of conventional, economical, halogen and some LED lights, plus adjustable dimming for different situations