MCO Home CO2 Sensor - 12V DC
MCOHome CO2 Monitor is an air quality detector which is compatible with Z-Wave technology
- Monitor CO2 concentration in air with high accuracy
- Monitors indoor temperature, humidity and VOC (optional)
- Power supply: 12VDC
- CO2 range: 0-2000ppm, default alarm threshold: 1000ppm (adjustable)
- Temperature range: -9.0～50 ℃; Humidity range: 0%～99%RH
- Z-Wave frequency: 868.42MHz(EU)
CO2 Monitor
MCOHome CO2 Monitor is an air quality detector which compatible with Z-Wave technology, it is mainly used to monitor CO2 concentration in industrial, agricultural, and residence environment, while monitoring the indoor temperature, humidity and VOC (optional) air quality. Device can be included into any Z-Wave network, and is compatible with any other Z-Wave certified devices.
Device is suggested to be installed indoor, a place with around 1.5m height above the floor where represents the average CO2 concentration. It should be away from direct sunlight, any cover, or any heat source, to avoid false signal for temperature control.
Specifications:
- Z-Wave frequency: 868.42MHz(EU)
- Monitor CO2 concentration in air with high accuracy
- Power supply: 12VDC
- CO2 range: 0-2000ppm, default alarm threshold:1000ppm (adjustable)
- Temperature range: -9.0～50 ℃; Humidity range: 0%～99%RH
- Dimension: 90 x 130 x 28mm (3.5" x 5.1" x 1.1")
- Installation: Wall-mounted (Vertical), Hole Pitch: 60mm or 82mm
- Housing: Tempered glass + PC Alloy
| Brand ID | MCO-HOME |
| HS CODE | 90268080000 |
| Z-Wave technology | Z-Wave (Gen 3) 868.42 MHz |
| IoT - Internet of Things | Wireless communication |
| Security | Detection of CO2 |
| Power Supply | Cable Power |
| Type of use | Indoor |
| IP Rating | IP20 |
| Humidity Sensor | Yes |
| Temperature Measurement | Yes |
| Detection of CO2 | Yes |
| Compatibility with HOMEY | Yes |
| FIBARO HC2 Compatibility | Yes |
| FIBARO HC LITE Compatibility | Yes |
| VERA PLUS Compatibility | Yes |
| VERA EDGE Compatibility | Yes |
| ZIPABOX Compatibility | Not Tested |
| RAZBERRY Compatibility | Yes |
| POPP Compatibility | Yes |
| PIPER Compatibility | Not Tested |
Super
Měření teploty, vlhkosti a CO2 je časté, přenos do Fibaro HC2 v pořádku. (VOC se nepřenáší).
Design je pěkný, sklo na povrchu, inverzní displej, neruší při málo osvětlené místnosti.
Spotřeba 60mA (se zapnutým podsvětlením) se špičkami cca 150mA (podle mě vhodný zdroj 12V 200mA)
Customers who bought this product also bought:
![Qubino Roller Shutter DC Plus [ZMNHOD1]](https://smarterhome.sk/3004-home_default/qubino-roller-shutter-dc-plus-zmnhod1.jpg)
30 other products in the same category:
Analog wind speed meter with 0-10V DC output
AEOTEC Doorbell 6 Button (ZW166)
Netatmo Smart Home Weather Station + Additional Smart Indoor Module
Netatmo Weather Station and Rain Gauge Pack
Pressure Mat PM156, 720x390x3mm
Pressure Mat PM140, 595x170x3mm
Pressure Mat PM4969, 720x560x3mm
Pressure Mat PM4971, 230x160x3mm
- SMART SOLUTIONS
- About Z-Wave
- Information
- Blog
- Forum
- Brands
- Write us
- B2b
- Trainings
- Contacts
- DEALS AND DISCOUNTS
- Z-Wave Controllers
- Sensors and detectors
- Electrical meters
- Heating and Climate
- Switches and Dimmers
- IP Cameras
- Door Locks
- Wall Plugs
- Window and Blinds Control
- Multimedia Control
- Starter Kits and Bundles
- APPLE HOMEKIT
- Danfoss Link
- WiFi / LAN
- Zigbee
- Other products
- Gadgety
- Refurbished
- DEALS AND DISCOUNTS
English 
Slovenčina 
Čeština