FIBARO Double Switch 2 (FGS-223 ZW5)

Detailed information can be found on the manufacturer's website. All product manuals are available at https://manuals.fibaro.com/

A New Generation of Relay Switch Modules

Double Switch 2 was designed to activate and deactivate electrical devices. Thanks to its small size it can be mounted in junction boxes or inside device casings. The module is controlled either through the Z-Wave network or a simple switch. Power and energy usage measurement feature allows you to monitor and lower your utility bills.

Connect your FIBARO Switch 2 to the system and other devices to enjoy the almost endless possibilities!

General Information

• Built-in scene activation mechanism
• Security and notification communication classes
• Configuration menu with a diode
• Latest generation Z-Wave 500 series chip & Z-Wave Plus protocol
• Energy and power measurement of connected devices
• Supports secure mode (Z-Wave Network Security) encrypted with AES-128

Convenient Sockets

Double Switch 2 is equipped with sockets that have an increased cross-section which allows you to connect it to wires with a larger diameter and simplify the installation process.

User-friendly Configuration Menu

A built-in RGB diode is of invaluable assistance during the installation process. The light will show whether Double Switch 2 has been added or removed from the network. You can also see whether a calibration or an update was successful.

A Stronger Signal

Double Switch 2 has an increased signal range which gives you more installation possibilities and an increased network coverage.

Easy to Mount

Just place the module in the junction box and connect it to an existing installation. The module's miniature size allows you to place it in many convenient spots.

Scene Management

Even the most complex actions can be activated via a wall switch connected to a module. With just a press of the button when entering a room, it’s as natural as turning on the lights.

Smart Notifications

Double Switch 2 features many safety measures that prevent it from voltage drop, overheating, or overcharging. In the case of any of these events, the system will immediately send you a notification.

Notification about Unused Devices

Double Switch 2 allows you to monitor electrical devices that are currently inactive. The system will notify you if you leave a device running and allow you to turn it off remotely.

Power Measurement

The new Double Switch 2 allows you to measure the power and energy of the connected load. You can see how much energy is used in your home through clear charts and use that information to reduce your electricity bills.

Mobile Device as a Remote

You may control the module and receive information through your home PCs and mobile devices. Double Switch 2 do not require expensive control panels in order to function.

Takes Care of Your Kids

Are you a parent or do you plan to become one in the near future? Monitoring your children’s study and play time, along with the ability to automatically activate their favorite multimedia might interest you.

Your Home is Wherever You Are

Double Switch 2 module, just like the entire FIBARO system, can be controlled from any place on earth. All you need is internet access.

Note: This module requires 3-wire (including neutral) installation. The output is not potential-free, it does not allow to control a dry contact or load another supply voltage than the input.

Technical Details

• Radio protocol: Z-Wave+
• Wireless: Z-Wave (868.42MHz)
• Radio signal power: up to 1mW
• Voltage: 110 - 240V AC
• Maximum load (per channel): 6.5A (Resistive)
• Maximum total load: 10A (Resistive)
• Power Consumption: < 0.8W
• Overcurren protection: required external 10A circuit breaker
• Range: up to 50m (outdoors) and 40m (indoors)
• Dimensions (LxWxH): 43 x 38 x 20mm
• Operational temperature: 0-35°C
• Scene management: 1 to 3 presses and holding the key pressed down can be mapped to four different actions
• System of control for each channel: Standard control, Delayed device activation, Delayed device deactivation, Auto on and auto off mode with additional options