€128.33 (tax excl.)
Shelly Wave 1PM is new generation of powerful switch for your automation solution with Z-Wave 800 chip inside.
- Connects to your Z-Wave network. HUB is required!
- Power metering and Wide range of voltages supported
- Over-load,-voltage,-temperature protection
- Max. switching current AC is up to 16A
- Fast processor ESP32
- Z-Wave 800
Shelly Wave 1PM
The Wave 1PM turns an ordinary wall switch or socket into a smart one. It can be used to automate a wide range of electrical devices, such as a light, ceiling fan, hot water tank, pool pump. It is ideal for power monitoring and remote control (on/off) of one electrical device or one group of devices, which can be controlled via smartphone/tablet according to schedules or scenes, etc. It is compatible with switches or push-buttons.
Advantages
- 1 channel 16 A total.
- Measures power consumption of the connected device.
- Small size ensures the simplest installation behind every wall switch or wall socket.
- Extended wireless range – up to 40 m indoors.
- SmartStart for the automatic set-up.
- OTA Firmware update for over-the-air updates.
- Security Vault™ ensures the highest level of security with features, such as secure boot, secure key management, secure debug, and more.
- S2 Security Authenticated.
- Extremely low energy consumption: less than 0.3 W.
- Works with Z-Wave certified hubs and over 4000 Z-Wave devices.
Technical Specifications
- Power supply: 110-240 V AC / 24–30 V DC
- Power consumption: < 0.3 W
- Power measurement (W): Yes
- Max switching voltage AC: 240 V
- Max switching current AC: 16 A
- Max switching voltage DC: 30 V
- Max switching current DC: 10 A
- Overheating protection: Yes
- Overload protection: Yes
- Distance: Up to 40 m indoors (131 ft.) (depends on local condition)
- Z-Wave™ repeater: Yes
- CPU Z-Wave™: S800
- Z-Wave™ frequency bands: 868,4 MHz; 865,2 MHz; 869,0 MHz;
- Maximum radio frequency power transmitted in frequency band(s): < 25 mW
- Size: (H x W x D) 37x42x16 ±0.5 mm / 1.46x1.65x0.63 ±0.02 in
- Weight: 27 g / 0.95 oz.
- Mounting: Wall console
- Screw terminals max. torque: 0.4 Nm / 3.5 lbin
- Conductor cross section: 0.5 to 1.5 mm² / 20 to 16 AWG
- Conductor stripped length: 5 to 6 mm / 0.20 to 0.24 in
- Shell material: Plastic
- Color: Red
- Ambient temperature: -20°C to 40°C / -5°F to 105°F
- Humidity: 30% to 70% RH
- Max. altitude: 2000 m / 6562 ft.
Data sheet
- Brand ID
- SHELLY
- Country of origin
- BG
- HS CODE
- 85437090
- Z-Wave technology
- Z-Wave 800
- IoT - Internet of Things
- Wireless communication
- Lighting Control
- Switching lights
- Energy Metering
- Power Metering
- Neutral wire
- Required
- Power Supply
- Cable Power
- Type of electrical interconnection
- Phase Connection
- Type of use
- Indoor
- IP Rating
- IP20
- Control of electrical circuits
- 1 Circuit
- Switching AC voltage 230V
- Yes
- Switching DC voltage 12-30V
- Yes
- Compatibility with HOMEY
- Not tested
- Compatibility with FIBARO HC3
- Not Tested
- FIBARO HC2 Compatibility
- Not Tested
- FIBARO HC LITE Compatibility
- Not Tested
- VERA PLUS Compatibility
- Not Tested
- VERA EDGE Compatibility
- Not Tested
- ZIPABOX Compatibility
- Not Tested
- RAZBERRY Compatibility
- Not Tested
- POPP Compatibility
- Not Tested
- PIPER Compatibility
- Not Tested
- Compatibility with O2 Smart Box
- Not tested
Leave a review