Z-Wave to DALI Controller
The Z-Wave to DALI controller is a Z-Wave device that is used to switch ON/OFF and adjust light intensity of DALI control gears on a DALI circuit and can be controlled by other Z-Wave devices. It can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
The device cannot act as Z-Wave network controller (prima- ry or secondary), so a security enabled controller is needed to take full advantage of all functions for the device.
The encryption modes that the Z-Wave to DALI controller supports are S0, S2 Unauthenticated. When the device is being included into a Z-Wave network, you can use your primary controller/gateway to enable encryption mode or disable encryption. (The primary controller/gateway shall support encryption mode configuration).
- Radio frequency 868.42 MHz (EU)
- Output DALI signal (DALI consumption < 2mA)
- Power Supply 12/24VDC
- Current Consumption 10mA
- Operating temperature 0-40°C
- Relative humidity 8% to 80%
- Dimensions (LxWxH) 45.5 x 45 x 20.3mm