Manufacturers

Qubino 3-Phase Smart Meter (ZMNHXD1)

GOA-ZMNHXD1-452

New product

  • Qubino 3-Phase Smart Meter is used for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications.
  • The device measures energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals.
  • It is designed to be mounted on DIN rail.

More details

169,00 € tax incl.


140,83 € tax excl.
in stock

- +

 
More info

Qubino 3-Phase Smart Meter (ZMNHXD1)

The Z-Wave Plus Qubino 3-Phase Smart Meter DIN-Module is intended to be used for energy measurements in three-phase electrical power network installations and can be used in residential, industrial and utility applications. The Qubino 3-Phase Smart Meter measures energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals.

The Qubino 3-Phase Smart Meter DIN-Module can be controlled through Z-wave network and it acts as a repeater in order to improve the range and stability of a Z-wave network. The Module is designed to be mounted on DIN-Rail.

Technical Details:

Main terminals (L1I, L2I, L3I, NO, L1O, L2O, L3O, NO)

  • Contacts capacity: 2.5 ... 16 (25) mm2
  • Connection screws: M5
  • Max torque: 3.5 Nm (PZ2)

Optional terminals (DI, DO)

  • Contact capacity: 1 ... 2.5 mm2
  • Screws: M3
  • Max torque: 1.2 Nm

Measuring input

  • Type (connection): three phase (4u)
  • Basic current (Ib): 5 A
  • Maximum current (Imax): 80 A
  • Minimum current (Imin): 0.25 A
  • Starting current: 20 mA
  • Reference Voltage (Un): 3x230 V / 400V
  • Power consumption at Un < 8VA
  • Nominal frequency (fn): 50 and 60 Hz

Accuracy

Active energy and power

  • Standard EN 62053-21 class 1
  • Standard EN 50470-3 class B

Reactive energy

  • Standard EN 62053-23 Class 2

LED

  • Colour: red
  • Pulse rate: 500 imp/kWh
  • Led on: no load indication

Optical communication

  • Type IR - used to control BICOM432-40-WM1

Input (16)

  • Rated voltage: 230 V (± 20%)
  • Input resistance: 450 kOhm

LCD

  • Display 7+1 digit (100Wh resolution)

Safety

  • Indoor Meter: yes
  • Degree of pollution: 2
  • Protection class: II
  • AC voltage test: 4 kV
  • Installation Category: 300 Vrms cat. III
  • Standard: EN 50470

Ambient conditions and EMC

  • According standards for indoor active energy meters.
  • Temperature and climatic condition according to EN 62052-11

Ambient conditions and Safety:

  • According standards for indoor active energy meters.
  • Temperature and climatic condition according to EN 62052-11
  • Dust/water protection: IP20
  • Operation temperature: -10 ... 55°C
  • Storage temperature: -40 ... 70°C
  • Enclosure material self extinguish, complying UL94 V
  • Indoor meter: yes
  • Degree of pollution: 2
  • Protection class: II
  • AC voltage test: 4 kV
  • Installation Category: 300 Vrms cat. III
  • Standard: EN 50470
  • Distance: up to 30 m indoors (depending on building materials)
  • Weight: 220g
  • Brutto weight (packaging included): 240g
  • Installation: DIN rail 35mm (EN 60715)
  • Dimensions: (W x H x D) 53,6 x 84 x 65mm
  • Package dimensions (W x H x D): 56 x 86 x 70mm
  • Colour: RAL 7035
 
Data sheet
Z-Wave technologyZ-Wave Plus (Gen 5) 868.42 MHz
IoT - Internet of ThingsWireless communication
Energy MeteringPower Metering
Neutral wireRequired
Power SupplyCable Power
Type of useIndoor
IP RatingIP20
FIBARO HC2 CompatibilityNot Tested
FIBARO HC LITE CompatibilityNot Tested
VERA PLUS CompatibilityNot Tested
VERA EDGE CompatibilityNot Tested
ZIPABOX CompatibilityNot Tested
RAZBERRY CompatibilityNot Tested
POPP CompatibilityNot Tested
PIPER CompatibilityNot Tested
Compatibility with O2 Smart BoxNot tested

Write a review

Qubino 3-Phase Smart Meter (ZMNHXD1)
  • Qubino 3-Phase Smart Meter is used for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications.
  • The device measures energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals.
  • It is designed to be mounted on DIN rail.

Write a review

Accessories

Customers who bought this product also bought:

27 other products in the same category:

Menu

Compare 0