Qubino Smart Meter [ZMNHTD1]

The first and only Z-Wave Product Worldwide for DIN-Rail Installation

The Z-Wave Plus Qubino Smart Meter DIN-Module is intended to be used for energy measurements in single-phase electrical power network installations and can be used in residential, industrial and utility applications. The Smart Meter measures energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals.

The Qubino Smart Meter DIN-Module can be controlled through Z-wave network and it acts as a repeater in order to improve the range and stability of a Z-wave network. The Module is designed to be mounted on DIN-Rail. 

Applications

The Qubino Smart Energy Meter can be used in combination with the Qubino Contactor or Qubino Bistable Switch for ON/OFF switching.

Technical Details:

Main terminals (LI, NI, Lo, No)

• Contacts capacity: 1.5 ... 16 (25) mm2
• Connection screws: M5
• Max torque: 3.5 Nm (PZ2)

Optional terminals (1,2,4,5)

• Contact capacity: 0.05 ... 1 (2.5) mm2
• Screws: M3
• Max torque: 0.6 Nm

Measuring input

• Type (connection): single phase (1b)
• Reference current (Iref): 5 A
• Maximum current (Imax): 65 A
• Minimum current (Imin): 0.25 A
• Starting current: 20 mA
• Voltage (Un): 230 V (±20 %)
• Power consumption at Un < 2W
• Nominal frequency (fn): 50 and 60 Hz

Accuracy

Active energy and power

• Standard EN 62053-21 class 1
• Standard EN 50470-3 class B

Reactive energy

• Standard EN 62053-23 Class 2

Optical communication

• Type IR - used to control BICOM432-40-WM1

Input (1)

• Rated voltage: 230 V (± 20%)
• Input resistance: 450 kOhm

Ambient conditions and EMC

• According standards for indoor active energy meters.
• Temperature and climatic condition according to EN 62052-11

Ambient conditions and Safety:

• According standards for indoor active energy meters.
• Temperature and climatic condition according to EN 62052-11
• Dust/water protection: IP20
• Operation temperature: -10 ... 40°C
• Storage temperature: -40 ... 70°C
• Enclosure material self extinguish, complying UL94 V
• Indoor meter: yes
• Degree of pollution: 2
• Protection class: II
• AC voltage test: 4 kV
• Installation Category: 300 Vrms cat. III
• Standard: EN 50470
• Distance: up to 30 m indoors (depending on building materials)
• Weight: 150g
• Brutto weight (packaging included): 170g
• Installation: DIN rail 35mm
• Dimensions: (W x H x D) 36 x 90 x 64mm
• Package dimensions (W x H x D): 40 x 95 x 80mm
• Colour: RAL 7035