€44.99 (tax excl.)
Heatit Z-TRM6 DC is an electronic thermostat with a potential free relay, designed for boiler control or actuators. The thermostat can be controlled through your Z-Wave network or via the buttons on the front.
- Dry contact 3A, PWM.
- User friendly interface.
- Internal room sensor.
- Z-Wave 800 chip.
Heatit Z-TRM6 DC
Heatit Z-TRM6 DC is an electronic thermostat with a potential free relay, designed for boiler control or actuators. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. The thermostat has a user friendly interface.
Heatit Z-TRM6 DC has 3 modes; Heat - Cool and Eco.
The thermostat fits in standard European junction boxes and may be used with most System 55 frames. It has a sturdy metal frame for secure fastening on the junction box. The thermostat has one built-in room temperature sensor. Two additional external temperature sensors may also be connected.
Heatit Z-TRM6 DC allows you to set the power metering value manually.
The thermostat can be set up with multiple associations and can be used as a master thermostat. It can control up to 10 thermostats and 10 external relays E.g wall plugs.
Dry contact - Thermostat especially for controlling loads connected potential-free.
Modes - The thermostat has 3 modes: Heat - Cool, and Eco. Cool and Eco are new features.
Metal frame - The thermostat features a metal frame for secure mounting in the junction box, which enhances the product’s durability in contrast to previous plastic solutions.
Associations - The thermostat can be set up with multiple associations and can be used as a master thermostat. It can control up to 10 thermostats and 10 external relays.
Power regulator - Heatit ZTRM-6 DC features a power regulator as an alternativ to temperatur regulation.
Hysteresis - With hysteresis regulation enabled, the thermostat will regulate solely based on temperature. The thermostat switches on and off based on the hysteresis value in relation to the setpoint.
Pulse width modulation/PWM - With pulse width modulation regulation enabled, the thermostat will regulate based on cycles. The thermostat switches on and off in percentage intervals of the cycle.
Open window detection - With open window detection, the thermostat detects if a window is open, allowing it to cut off heating when there is a rapid drop in temperature.
Manual powermetering - The thermostat has a manual power metering that gives you an overview of the consumption in real time. The size of load is set as a fixed value in the menu
Push buttons - With a combination of push buttons and touch functionality, the thermostat has become more user-friendly.
Product Features
- Z-Wave thermostat
- Internal room sensor
- External room sensor (wired by cable) (not included, sold separately)
- Floor sensor (included 3m - 10kΩ)
- Temperature limiter
- Boiler control
- Control of actuators
- 3 modes: Heat - Cool and Eco
- Hysteresis/PWM
- Temperature calibration
- Open window detection
- Relay status icon
- Adjustable display brightness
- Single pole switch
- Lock mode/child lock
- Temperature readout in gateway
- Weekly schedule in gateway
- Manual power metering
- SmartStart
- Firmware update (OTA)
- Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class
Technical data:
- Voltage 230VAC 50Hz
- Max current 3A
- Own power usage 2W
- Switch type One-pole switch
- Connection type Screw clamps
- Connection terminals diameter 0.2 til 2.5mm²
- Max tightening torque connections 2N·m
- Alternate IoT-communication procols
- No alternative communication protocols
- Min radio frequency range 40m
- Over The Air update (OTA) Yes
- Push buttons 3
- Temperature measurement range 5 til 40°C
- Z-Wave encryption mode: S2 Authenticated Class, S2 Unauthenticated Class S0
- Primary IoT Protocol Z-Wave
- Z-Wave Chip Z-Wave 800 chip
- Z-Wave frequency Z-Wave - 868.4 MHz (EU)
- Compatible NTC-sensors (kΩ @ 25°C) 6.8, 10, 12, 15, 22, 33, 47, 100
- Effect regulator Timed cycle 0-30 minutes
- Error margin temperature 0,5°C
- Temperature sensitivity Temperature sensitivity ±0,5
- Hysteresis 0,3 to 3,0 (default hysteresis 0,5)
- Ohm value at 25°C 10kΩ
- Regulation temperature 5 til 40°C
Data sheet
- Brand ID
- HEATIT
- Country of origin
- CN
- HS CODE
- 90321020900
- Z-Wave technology
- Z-Wave 800
- IoT - Internet of Things
- Wireless communication
- Power Supply
- Cable Power
- Heating Control
- Water Floor Heating
- Type of use
- Indoor
- IP Rating
- IP21
- Temperature Measurement
- Yes
- Compatibility with HOMEY
- Not tested
- Compatibility with FIBARO HC3
- Not Tested
- FIBARO HC2 Compatibility
- Not Tested
- FIBARO HC LITE Compatibility
- Not Tested
- VERA PLUS Compatibility
- Not Tested
- VERA EDGE Compatibility
- Not Tested
- ZIPABOX Compatibility
- Not Tested
- RAZBERRY Compatibility
- Not Tested
- POPP Compatibility
- Not Tested
- PIPER Compatibility
- Not Tested
- Compatibility with O2 Smart Box
- Not tested
Leave a review