AEOTEC Nano Shutter (ZW141-C)

AEOTEC Nano Shutter (ZW141-C)

Close your motorized windows automatically if it starts raining or shut down your shades if it is to warm outside.

The Aeotec Nano Shutter enables you to control a broad selection of devices wirelessly and intelligently. The module equips motors for shutters, shades, garage doors, venetian blinds, etc. with Z-Wave technology. Thus, shutters and venetian blinds can be controlled both wirelessly via Z-Wave commands and locally via the connected conventional wall switch. The Aeotec Nano Shutter is designed to be mounted inside a flush mounting box, hidden behind a conventional wall switch.

What makes it special?

• Best-in-class amperage - Nano Shutter can draw up to a maximum of 2.5 amps when used with an inductive load. That’s the equivalent of 5 amps with a resistive load. 2.5A sees Nano Shutter easily outperform competitors’ offering of just 1.7A.
• Best-in-class security - Nano Shutter is the only Z-Wave motor controller with S2 integrated. S2 (Security 2) enhances the security of Z-Wave with next-generation anti-hacking features including AES-128 bit encryption and ECDH key exchange.
• Largest wireless performance - Built upon Z-Wave Plus, Nano Shutter has been certified to wirelessly communicate over a 150 metre / 492-foot distance in interference-free environments. Owing to its use of S2, Nano Shutter also offers a wireless speed that is up to 50% faster versus non-S2 motor controllers.
• 60% smaller - Crafted to be simple to install, Nano Shutter has also been crafted to be easier to install. It’s 60% smaller than Aeotec’s Micro Motor Controller.

Technical Details:

• Model number: ZW141.
• Repeater: Yes
• Beaming: Yes
• AES 128 Security: Yes
• S2 Framework: Yes
• Dimensions: 42.5 x 40 x 20 mm (1.7 x 1.6 x 0.8 in)
• Power Input: 120 - 240VAC and 50/60Hz
• Power Output: Motor type: Single-phase AC asynchronous motor.
• Max load rating: 100-240VAC, 50/60Hz, Max:2.5A.
• Wiring Terminals: N, L, IN, OUT1, OUT2, S1, S2, Touch Panel
• N – Power input for neutral
• L – Power input for live
• IN – Input for load power supply
• OUT1 – Output for Motor direction 1
• OUT2 – Output for Motor direction 2
• S1 – External switch 1 control for Motor
• S2 – External switch 2 control for Motor
• Max standby power: <0.8W.
• Operating temperature: 0℃ to 40℃ 32 ℉ to 104 ℉ .
• Operating humidity: 8% to 80%.
• Operating distance: Up to 492 feet outdoors. Up to 150 metres outdoors.
• Environment of Installation: Must be installed indoors, Should be located in a dry location, Should be installed in a fire resistant plastic gangbox. Should not be installed in a metal gangbox for optimization of Z-Wave range.