Shelly Qubino Wave Pro 1 - relay switch 1x 16A (Z-Wave)

Shelly Qubino Wave Pro 1 - Professional 1-channel DIN rail Z-Wave® smart switch with dry contacts

Suitable for home and facility automation with remote control. DIN-rail mountable. Enhanced safety features.

• 1 output, 16 A
  
• Potential-free contacts (dry contacts)
  
• DIN-rail mountable
  
• Extremely low power consumption: < 0.3 W
  
• Z-Wave frequency band: 868.4 MHz (CEPT countries)
  
• Latest technology: Z-Wave 800 Series
  
• Automatic set-up with SmartStart
  
• Security 2 Authenticated for the highest level of security
  
• Over-the-air firmware updates
  
• Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices

*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.

The best solution for new home buildings and business facilities

Wave Pro 1 is a one-phase, 1 channel relay supporting up to 16 A for professional lights and appliance automation in residential or commercial applications. It is equipped with potential-free outputs (dry contacts) offering high flexibility in voltage support and applications. Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs. 

Shelly Qubino works on Z-Wave

By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world.

Works with any Z-Wave gateway

Wave Pro Series is designed to be installed on the DIN-rail inside the breaker box. Once installed, include the device in your Z-Wave network (Z-Wave gateway is required) and control connected appliances from anywhere using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways.

Functionalities

• Z-Wave operated - Include Wave Pro 1 to your Z-Wave network and control it remotely. It‘s compatible with all certified Z-Wave gateways.
• 1 channel, 16 A - It has a total device output of 16 A.
• Dry contacts - Supporting low and high voltages, this device enables you to control a wide range of AC devices and appliances.
• DIN-mountable - Intended to be installed inside the breaker box and designed to meet the global DIN rail standardization.
• Associations - Establish direct communication between devices in your Z-Wave local network and set actions with no hub present!
• The highest level of security - Include the device as Security 2 Authenticated for encrypted communication and utmost safety of your Z-Wave network.

Endless use applications

• Dynamic lights control for improved efficiency - Automate your lights and optimize their energy consumption through smart schedules, scenes, actions, etc. Wave Pro 1 allows you to automate the lights on each floor separately and set custom schedules for each of them.
• Sockets automation for efficient energy use - Make sure that no energy goes to waste by automating the sockets' power supply with Wave Pro 1 and set smart schedules to cut off the power to all electrical appliances between 7:00 PM and 7:00 AM during the weekdays and between 7:00 PM on Friday and 7:00 AM on Monday.
• Common space automation - Common spaces such as halls, garages, and storage rooms usually have their lights constantly switched on, which leads to inefficient usage of energy and unnecessary monthly costs.

Specifications

• Power supply: 110-240 V AC, 50/60 Hz
  
• Power consumption: < 0,3 W
  
• Max. switching voltage AC: 240 V
  
• Max. switching current AC: 16 A
  
• Overheating protection: Yes
  
• Power measurement (W): No
  
• Distance: Up to 40 m indoors (131 ft.) (depends on local condition)
  
• Z-Wave repeater: Yes
  
• CPU: Z-Wave S800
  
• Z-Wave frequency bands: 868,4 MHz
  
• Maximum radio frequency power transmitted in frequency bend(s): < 25 mW
  
• Size (H x W x D): 94x19x69 ±0.5 mm / 3.70x0.75x2.71 ±0.02 in
  
• Weight: 60 g / 2.12 oz.
  
• Mounting: DIN rail
  
• Screw terminals max. torque: 0.4 Nm / 3.54 lbin
  
• Conductor cross section: 0.5 to 2.5 mm / 20 to 14 AWG (green connector) 0.5 to 1.5 mm / 20 to 16 AWG (white connectors)
  
• Conductor stripped length: 6 to 7 mm / 0.24 to 0.28 in (green connector) 5 to 6 mm / 0.20 to 0.24 in (white connectors)
  
• Shell material: Plastic
  
• Color: Blue
  
• Ambient temperature: -20°C to 40°C / -5°F to 105°F
  
• Humidity: 30 % to 70 % RH
  
• Max. altitude: 2000 m / 6562 ft.