€46.08
(tax excl.)
€78.99
Analog anemometer with 0-10V DC output
- Power Supply: 12-24V DC
- Measurement range: 0 ~ 30 m/s
- Measurement accuracy: +/- 3%
- Start wind speed: < 0.6 m/s
- This is not Z-Wave device!
- To use with Fibaro Smart Implant, Fibaro RGBW Controller or Z-Wave.me Z-Uno
Warning 1: This device is not Z-Wave!
Warning 2: To use with Fibaro Smart Implant, Fibaro RGBW Controller or Z-Wave.me Z-Uno
Wind speed sensor with output voltage signal 0-10V.
Technical parameters:
- Signal output: 0-10V
- Input voltage: 12-24V DC
- Response time: < 1 S
- Measurement range: 0 ~ 30 M/S
- Measurement accuracy: +/- 3%
- Start wind speed: < 0.6 M/S
- Environment temperature: -35 ~ 85°C
- Material: Aluminum alloy, the surface waterproof, prevent corrosion treatment
- Cable length: 2m
Wiring
- brown = 12-24V DC +
- black = 12-24V DC -
- yellow = 0-10V output +
- blue = 0-10V output -
Signal output: 0-10V
- 1V voltage = 3m/s wind speed
- 2V voltage = 6m/s wind speed
- 3V voltage = 9m/s wind speed
- the max is 30m/s wind speed
Data sheet
- Brand ID
- SMARTERHOME
- Z-Wave technology
- No
- Power Supply
- Cable Power
- Wind Speed Measurement (Anemometer)
- Yes