AEOTEC Dual Nano Switch with Energy-Use Metering (ZW132-C)
Convert any switch or outlet into a Z-Wave connected switch or outlet and control it wirelessly.
With the AEOTEC Dual Nano Switch with Energy-Use Metering (ZW132-C) all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. Additionally, the ZW116 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.
Aeotec Dual Nano Switch with Energy-Use Metering (ZW132-C) with power metering allows you to automate, schedule and manually control any of your home’s wall switches or power outlets using Z-Wave gateways, hubs and apps. As well as its standard on/off control and automation, this edition offers accurate energy consumption monitoring, allowing you to track and reduce your electricity spend.
Super small, only 42.5 mm wide and 20 mm deep, Dual Nano Switch with power metering can be easily installed in the wall or wiring box behind any of your home’s existing switches or sockets, requiring nothing in your home to be changed. This invisible method of installation works with your wiring that has a neutral and for Dual Nano Switch with power metering to be controlled both by Z-Wave and any existing switch.
Utilizing Z-Wave Plus and Aeotec’s Gen5 technology, Dual Nano Switch is compatible with certified Z-Wave gateways, hubs and software including Samsung SmartThings, Mios Vera, FIBARO, Jeedom, and Open Z-Wave.
The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
- Model number: ZW116-C
- Frequency: 868.42 Mhz
- Power input: 230V 50Hz
- Max load: 2x1150W
- Dimensions: 42.5 x 40 x 20 mm
- Protocol: Z-Wave Plus (Gen5)
- Repeater: Yes
- Beaming: Yes
- AES 128 Security: Yes
- Wiring: 3 wires - needed neutral
- Power measurement accuracy: ±3W
- Max standby power: <0.8W
- Operating distance: Up to 150 meters outdoors.
- Relative humidity: 8% to 80%
- Operating temperature: 0℃ to 40℃