FIBARO Roller Shutter 4 (FGR-224), Z-Wave 800

FIBARO Roller Shutter 4

FIBARO Roller Shutter 4 is a device designed to control roller blinds, awnings, venetian blinds, curtains and pergolas. FIBARO ROLLER SHUTTER 4 allows precise positioning of roller blinds or venetian blind slats. The device is equipped with energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.

The FIBARO Roller Shutter 4 has been developed for the operation and accurate positioning of AC-controlled motors, including roller shutters, blinds, awnings , screens and ports. The module supports motors without a built-in driver but with mechanical and electronic final adjustment. The difference with the FIBARO Roller Shutter 3 is that it is no longer suitable for motors with a built-in driver.

• New devices design - FIBARO focused on easy installation and intuitive first run. There are more inputs for N and L wires, so that allows opt-out from using splicing connectors.
• Smaller device - Device's shape and dimension enable easy and fast installation in flush-mounted boxes. Button and the diode are easily accesible.
• Equipped with plug connectors - Enable even faster assembly - no need to use screw driver.
• 3 Extra connecting cables included in the box - Additional wires to connect the button are included.
• Inbuilt Bridge - Easy bridging option for live and neutral. There is no need to use wago connectors for connecting wires. You save the space in the box and shorten installation time thanks to push-in wires connector.

Features

• Compatible with any Z-Wave or Z-Wave+ Controller
• One of the smallest shutter controller available
• Equipped with Z-Wave 800 chip to provide better range
• Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
• Can be used with roller blinds, venetian blinds, pergolas, curtains, awnings, blind motors with electronic or mechanical limit switches
• Active power and energy metering functionality
• Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network
• Works with various types of switches – momentary, toggle and dedicated roller blind switches
  Easy and quick too install thanks to push-in wires connector and inbuilt bridge
• To be installed in wall switch boxes

Technical specifications

• Power supply: 100-240V~50/60Hz
• Rated load current: 2A for motors with compensated power factor (inductive loads)
• Supported motor type: single-phase AC motors
• Required limit switches: electronic or mechanic
• Operating temperature: 0°C - 35°C
• For installation in boxes: Ø = 50mm, depth ≥ 60mm
• Radio protocol: Z-Wave (800 series chip)
• Radio signal power: up to 5dBm
• Radio frequency band: 868.4 MHz
• Range: up to 100m outdoors, up to 30m indoors (depending on the terrain and building structure)
• Dimensions (L x W x H) 46mm x 36mm x 19,9mm
• Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU

Detailed information can be found on the manufacturer's website. All product manuals are available at https://manuals.fibaro.com/