Warning: AEOTEC Button is not Z-Wave device, it works only with AEOTEC Doorbell 6 or Indoor Siren 6.
Warning: The range between Aeotec Doorbell 6 / Indoor Siren 6 and Aeotec Button is max 10-15m indoors.
Note: In the FIBARO HC2 / HCL, it is not possible to monitor the status of the door button and link to pressing the button to start other devices or scenes except of the siren. This means that when you press the Aeotec Button in front of the door, the Aeotec Doorbell 6 will sound, but information of pressing button is not available in the FIBARO HC2 / HCL. Why is this so? Because of implementation the Z-Wave command classes in Aeotec device and older Z-Wave chip used in FIBARO HC2 and HCL control units.
With the Aeotec Button you complete your bell system.
The Button triggers your Aeotec Doorbell 6 or Indoor Siren 6 to ring by sending a 433MHz signal. You can link up to three buttons to a Doorbell to cover different home entrances.
Due to the battery operation, which is very long-lasting with approx. 2 years, the installation is very easy with two small screws or even double-sided adhesive tape at any place (up to 90m away from the Aeotec Doorbell 6/Siren 6).
Action button for Aeotec Doorbell 6 and Indoor Siren 6
Simple installation with adhesive tape
Up to 2 years battery life
Can be mounted up to 90m away from Doorbell 6 or Indoor Siren 6
3 Buttons per Doorbell 6 or Siren 6
Wireless technology: 433MHz
IoT - Internet of Things
Type of use
Compatibility with HOMEY
FIBARO HC2 Compatibility
FIBARO HC LITE Compatibility
VERA PLUS Compatibility
VERA EDGE Compatibility
Compatibility with O2 Smart Box
Notes to compatibility
Partial compatibility - unable to adjust the volume, not all predefined tones are available to the control unit